You can revive the dead battery in another vehicle by jump-starting it. You will need jumper cables and a power source to jump-start another vehicle. You also need to prepare the vehicles. Make sure that there is enough voltage to jump-start the vehicle. Both vehicles need to be in neutral or park. Turn off both vehicles. Open both hoods of the car and attach the jumper cables. The donor vehicle needs to be started first. The next step is to start the dead vehicle.
Unclip all of the jumper cables. The vehicle that was dead needs to run without stopping for at least 10 to 20 minutes. You may need to repeat this entire process if the vehicle does not start. If the vehicle still does not start, then the driver likely needs another battery from our service center in Bradenton, FL.
